OmniPod UST200, Руководство пользователя

Страница: 87 / 194

Using the Personal Diabetes Manager
73
6
Reset PDM (soft reset): Restores all settings in the PDM to the
factory defaults.
Diagnostic options
1. On the Home screen, use the Up/Down Controller buttons
to choose Settings , then press Select .
2. Choose System setup , then press Select .
3. Choose Diagnostics , then press Select .
To check alarms
1. Choose Check alarms , then press Select .
2. Press OK . The PDM beeps three times. If a Pod is active, the
Pod then beeps three times.
To reset the PDM
1. Choose Reset PDM , then press Select .
2. If the Pod is deactivated, the PDM asks for confirmation and
reminds you that you will lose all user settings (Figure 6-14 on
the following page). Press
Confirm to reset the PDM.
If the Pod is still active, you will be unable to reset the PDM
(Figure 6-15 on the following page). Press
OK to return to the
Diagnostics menu.
If the PDM fails to beep, immediately call Customer
Care at 800-591-3455 (from outside the United
States, 781-457-5098). If a Pod is active and fails to
beep, change the Pod immediately (see Chapter 5,
Using the Pod). Continuing to use the System in
these situations may put your health and safety at
risk.
Resetting the PDM deletes all basal programs, temp
basal presets, carb presets, bolus presets, and all sug-
gested bolus settings. Before you use this feature
and delete these settings, be sure you have a written
record of the information you need. History records
will not be deleted.
As a safety feature, you cannot reset the PDM when a
Pod is active. You must first deactivate the Pod.
Check the alarm function at every Pod change.