OmniPod UST200, Руководство пользователя

Страница: 40 / 194

Understanding and Adjusting Basal Rates
26
3
Enable an existing temporary basal preset
1. On the Home screen, use the Up/Down Controller buttons
to choose Temp basal ; then press Select .
2. Choose the temporary basal preset you want to use from the
list (Figure 3-15), then press Select .
3. If you want, change the duration for the temporary rate, in
half-hour increments, then press Enter .
4. Press Confirm to begin the temporary basal rate shown on
the screen. The Pod beeps to indicate that the chosen tempo-
rary basal preset is running.
Cancel an active temporary basal preset
1. On the Home screen, use the Up/Down Controller buttons
to choose Suspend/cancel ; then press Select .
2. Choose Cancel temp basal , then press Select .
3. Press Confirm to cancel the actively running temporary basal
preset.
Change, rename, or delete a temporary basal preset
1. On the Home screen, use the Up/Down Controller buttons
to choose Settings ; then press Select .
2. Choose Presets , then press Select .
3. Choose Temp basal presets , then press Select .
4. Choose a temporary preset from the list, then press Edit .
5. Follow the steps below.
Figure 3-15
If you suspend insulin delivery while a temp basal is
running, the temp basal will be cancelled when you
resume.
You cannot edit, change, or delete a temporary basal
preset that is actively running.