Checking Your Blood Glucose
86
7
3. Insert only the top end of the strip into the test strip port, with
the dark colored rectangle going into the meter (Figure 7-17
and Figure 7-18).
Set the blood glucose test strip code
After you insert the strip, the PDM displays a code number
(Figure 7-19). This number must match the code on the side of
the vial.
To change the code number, press the
Up/Down Controller
buttons until the number matches the number on your vial. The
numbers are between 1 and 50.
If you do not adjust the code number within 2 seconds, the next
screen appears automatically (Figure 7-20).
If you do not start the test within 2 minutes, the PDM
powers off. To restart the PDM, take out the unused strip
and reinsert it, or simply press and hold the
Power
but-
ton to turn on the PDM.
Figure 7-17
Figure 7-18
Figure 7-19
Figure 7-20
Bottom
Top
Содержание UST200
Страница 1: ...User Guide MyOmniPod com...
Страница 3: ...User Guide Model UST200...
