Communication Failures
135
11
■
Failure During a Hazard Alarm
If you respond to a hazard alarm (see Chapter 10, Errors, Adviso-
ries, and Hazard Alarms), but the PDM cannot communicate with
the Pod to acknowledge or shut off the alarm, you can shut off
the alarm manually.
1. Remove the Pod from your body if you have not already
done so.
2. Press the end of a paper clip or similar item straight down into
the manual alarm shut-off port (Figure 11-17) on the top side
of the Pod (Figure 11-18). The port can be found by following
the bright white trail on the top of the Pod. Move the paper
clip back and forth until the alarm stops. Then discard the Pod
according to local waste disposal regulations.
Figure 11-17
Figure 11-18
Содержание UST200
Страница 1: ...User Guide MyOmniPod com...
Страница 3: ...User Guide Model UST200...
