OmniPod UST200, Руководство пользователя

Страница: 29 / 194

Getting Started
15
2
Enter the duration of insulin action
1. Use the Up/Down Controller buttons to enter the duration
of insulin action (how long insulin lasts in your body), then
press Next .
Select bolus increment and enter maximum bolus
1. Choose a bolus increment (how much each press of the
Up/Down Controller buttons will increase or decrease a
bolus amount)—either 0.05, 0.10, 0.50, or 1.00 units of insu-
lin—then press
Next .
2. Choose the maximum bolus you can give at one time, then
press Next .
Set extended bolus doses
1. To set the units for an extended bolus dose, choose % for per-
cent of the total bolus, or choose Units for units of insulin. To
turn off the extended bolus feature, choose Off . Then press
Next .
Set low reservoir alert
1. Choose the level of insulin in the reservoir at which the
PDM should give you an alarm. Choose from 10 to 50 units
in 5-unit increments, then press
Next .
The PDM now asks whether you want to activate a Pod
(Figure 2-4).
• Press Yes if you are ready to activate a new Pod. See Chap-
ter 5, Using the Pod, to learn how to activate a new Pod.
• Press No if you do not want to activate a Pod at this time.
The PDM displays the Home screen.
The duration-of-insulin-action setting is used to
calculate the amount of insulin on board (IOB) from
a previous correction bolus, when you use the sug-
gested bolus calculator.
The maximum bolus default is 10 units. Check with
your healthcare provider before adjusting these
settings.
Figure 2-4