OmniPod UST200, Руководство пользователя

Страница: 78 / 194

Using the Personal Diabetes Manager
64
6
Ratios/factors/targets
When the suggested bolus calculator is turned On , you can view
and change all the settings using the Ratios/factors/targets
menu option. Choose Review all settings , then press Select
(Figure 6-7a ). Or choose one setting from the menu, then press
Select (Figure 6-7b). The steps are the same whether you choose
all settings or individual ones.
1. Target BG and correct-above value —You can edit existing
segments and add segments, up to a total of four.
a. To edit an existing target BG time segment, choose the
segment, then press Edit . Use the Up/Down Controller
buttons to choose a new start time, end time, target BG
value, and correct-above value (correction threshold).
Press
Next after each entry.
b. To add a segment, choose [add new] , then press New .
Use the Up/Down Controller buttons to choose a start
time, end time, target BG value, and correct-above value
(correction threshold). Press
Next after each entry.
c. When you have completed all the time segments you
want, press Done , then Save .
2. Min BG for calcs (minimum blood glucose value allowed for
calculating boluses)—Use the Up/Down Controller buttons
to enter a new minimum BG, then press Enter .
3. Insulin to carb (IC) ratio —You can edit existing time seg-
ments and add segments, up to a total of four.
a. To edit an existing IC ratio time segment, choose the seg-
ment, then press Edit . Use the Up/Down Controller but-
tons to choose a new start time, end time, and IC ratio.
Press
Next after each entry.
b. To add a segment, choose [add new] , then press New .
Use the Up/Down Controller buttons to choose a start
time, end time, and IC ratio. Press Next after each entry.
When the suggested bolus calculator is turned Off , the
Ratios/factors/targets option does not appear in the
Bolus/basal/calcs menu.
Figure 6-7a Figure 6-7b