OmniPod UST200, Руководство пользователя

Страница: 107 / 194

Checking Your Blood Glucose
93
7
■
Entering Blood Glucose Readings Manually
You can enter blood glucose readings manually into the PDM.
This is particularly helpful if you use a separate blood glucose
meter.
1. On the Home screen, use the Up/Down Controller buttons
to choose More actions ; then press Select .
2. Choose Add BG reading , then press Select .
3. Use the Up/Down Controller buttons to enter the BG read-
ing from your separate meter.
4. Press Tag to assign a tag to the reading. Press OK when fin-
ished. (For an explanation of entering tags, see page 91.)
5. Press Save to save the reading.
Or press Cancel to return to the More actions menu without
saving the reading.
■
Editing Tags
Within 2 hours of a blood glucose reading, you can remove or
change a tag or add one. However, you cannot alter a Control tag.
1. On the Home screen, use the Up/Down Controller buttons
to choose More actions ; then press Select .
2. Choose Assign/Edit BG tags , then press Select .
3. Use the Up/Down Controller buttons to choose a reading,
then press Tag (Figure 7-35). A User Info/Support icon ( ? ) is
shown to the right of any reading to which you have already
assigned one or two tags.
Or press Done to return to the More actions menu.
To enter a “LOW” reading, press the Up/Down
Controller buttons down until you reach the mini-
mum value (20); then press down one more time.
To enter a “HIGH” reading, press up until you reach
the maximum value (500); then press up one more
time.
Figure 7-35