manualshive.com logo in svg

Omnia 7AM, Руководство пользователя

Поделиться
Скачать
Omnia 7AM Скачать руководство пользователя страница 9

IX

     |     Getting the Most from this Manual

Getting the Most from this Manual

Let’s be honest about a few things right up front:

 

♦

Omnia.7 offers a lot of power and flexibility, characteristics that inherently bring a degree of complexity 
along for the ride.

 

♦

Its menu and control architecture is logical, but also broad and deep, so we’ve organized the chapters and 
their contents in a manner that duplicates the menu structure of the front panel from the big picture (the 
Home Screen) down to every individual control. 

 

♦

This is not a short manual.

 

♦

Your time is valuable and limited.

While we’d love for everyone to read this enthralling literary masterpiece cover-to-cover and fully understand all of 
what Omnia.7 can do, that’s just not practical for the majority of users. 

Most of you would like to rack it up, plug it in, find a suitable preset for your taste and market, maybe tweak it up 
a bit, and then try to eat lunch before the really important stuff lands on your desk. Like the virus-plagued laptop 
from that sales guy (again). Or the wireless mic that the intern backed over with the promotions van (again). Or 
the urinal that won’t stop running. You know, the real reasons you got into broadcasting. 

With that in mind, here’s what we suggest:

 

♦

When you’re done here, go to Chapter 2, the Quick Startup Guide. 

This is bare bones stuff including 

physical I/O, routing the audio within Omnia.7, setting levels, and picking a preset. 

 

♦

Read Chapter 18, the FAQ section. 

Most users have the same or similar questions. We’ve attempted to 

answer those here. 

 

♦

Read Chapter 3, General Processing Advice, 

especially if you don’t consider yourself to be a processing 

expert. It’s a short chapter but has non-technical, non-product-specific tips that will serve as a good 
foundation as you adjust your sound. This is also good reading for your Program Director, General 
Manager, or anyone else who may have a say in the overall sound of the station. We encourage you to 
share it with them. 

 

♦

Read Chapters 4 and 6 

 - they’ll get you familiar with using the controls and reading the meters. 

 

♦

Glance through Chapter 16, the System menu, 

or just poke around the System menu on the front panel 

just to get an idea of what’s there. These tend to be high-level, global, set-and-forget items. 

Содержание 7AM












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды