CHAPTER 2 |
6
QUICK STARTUP GUIDE
Choose a Preset
Return to the Home Menu, then navigate to the
AM > Processing
menu. Select
Load Preset
to choose one of the
factory presets. We suggest you audition all of the factory presets to get a feel for each of them.
Note:
Omnia.7 contains a relay-bypass feature that allows unprocessed audio to pass directly through the
unit to prevent complete loss of audio (dead air) any time the software is not active. This includes
when the unit loses power, is in the start-up process, or must re-initialize its software after applying
certain user-initiated configuration changes.
Normally this is not an issue. However, in certain situations - for example, if you have a CD player
connected to the analog inputs and an amplifier or speakers connected to the analog outputs - this
means the input and output will be directly connected
with no attenuation whatsoever,
resulting
in fried speakers (or eardrums) or an eviction notice following complaints from irritable neighbors.
When engaged, the bypass relays hard wire the analog inputs to the analog outputs, and the AES
digital inputs to the AES digital outputs.
Adjust AM Options and Output Audio
Navigate to the
System > I/O Options > AM Options
menu. Here you will find controls for Pre-Emphasis, HPF
(HighPass - Lo Cut - Filter), LPF (LowPass – Hi Cut / NRSC Filter), Invert input phase, Positive Peak extension,
Test tone generator, 100% Reference level set, Night mode adjustments, input audio Phase rotation/scrambling
and. TX OUT (transmitter output level & tilt compensation adjustments),
For full details, please see Chapter 10 starting on Page 36.