background image

CHAPTER 18  | 

125

FREQUENTLY ASKED QUESTIONS

Where do I get a copy of the remote software?

The remote software client (NfRemote) is always available from within Omnia.7 itself and can be retrieved using 
the built-in HTTP server.  Any time you update your Omnia.7 software it is a good idea to update your NfRemote 
software as well to ensure compatibility. 

The computer used to access the HTTP server must be on Omnia.7’s “white list” and Omnia.7 must be set up 
properly on your local network.  To place a computer on the white list, navigate to 

System > System Config  >  

HTTP Access

 and enter the IP address and subnet mask in the format shown.

Using a web browser of your choice (and the actual IP address of your Omnia.7 to replace the sample address 
here), enter 

http://192.168.1.1:7380

. This will bring up the HTTP server home page which contains a link to the 

NfRemote software. Download, locate and install the software. Once installed, assign a 

friendly

” 

name of your 

choice in the 

Comment

” 

field, enter the IP address and password, and click “Connect”.

Содержание 7AM












































































































































Отзывы: