OHAUS DISCOVERY BALANCE, Руководство по обслуживанию

Страница: 72 / 99

CHAPTER 4 TESTING
5. Maximum allowable change in displayed weight readings is shown in Table 1-2
(page 1-3) for each of the four positions. If this reading is exceeded, follow
procedures in Section 4.2.4 – Adjusting Off Center Load.
4.2.2 Adjusting Off Center Load
If the Off Center Load (OCL) is excessive, perform adjustment as follows:
1. Pop out the hole plugs and insert both Allen Keys from the Service Toolset
as shown in Figure 4-2.
Allen Key
inserted in
pop-out hole
in back cover
Allen Key inserted in
pop-out hole in back
cover
Figure 4-2. Holes in back cover must be popped out
to insert Allen Keys.
The recommended position for the OCL adjustment is shown in Figure 4-3.
Figure 4-3. Proper position for adjusting Off-Center Load.
Ohaus Corporation www.ohaus.com 4-2 Discovery Balance Service Manual