OHAUS DISCOVERY BALANCE, Руководство по обслуживанию

Страница: 48 / 99

CHAPTER 3 REPAIR PROCEDURES
3.2.2 Load Cell Disassembly
18. Remove the Up/down Stop Plate that controls the Ratio Beam’s movement.
Figure 3-53. Up/Down Stop Plate.
Figure 3-54. Removing Temperature
Conductor.
19. Remove the Temperature Conductor, as shown in Figure 3-53.
20. Remove the two screws that secure the Magnet Cover, and carefully remove the
Magnet Cover by lifting it straight up.
Figure 3-55. Removing screws that secure
the Magnet Cover.
Figure 3-56. Lifting off the Magnet Cover.
Ohaus Corporation www.ohaus.com 3-28 Discovery Balance Service Manual