Oce VarioPrint i Series, Руководство по эксплуатации

Страница: 250 / 402

A. Starting up the printer.
Awaking from sleep mode starts with a wet tissue wipe when the last
wet tissue wipe was longer than eight hours ago.
B. Going to sleep mode. When the sleep mode is activated - by a user or the sleep mode timer - a
wet tissue wipe occurs.
C. Between print runs. A purge & dry tissue wipe is needed when a new print run starts, more
than 40 seconds later than the previous print run ended. When there are jobs to print the
printhead unit goes to the maintenance position. If the previous wet tissue wipe was more than
eight hours ago, a wet tissue wipe is performed. In this example at 15:30.
D. Non-stop printing. When the printer prints continuously, a wet tissue wipe and purge & dry
tissue wipe are scheduled 3.5 hours after the previous purge & dry tissue wipe. The run will be
interrupted.
E. Print other media. Media print parameters define how media are printed. When new media are
printed, a purge & dry tissue wipe can be needed. For example, when the printer prints on a
smaller media size for longer than 40 seconds, a purge & dry tissue wipe is needed before the
printer can continue with the wider media.
F. Repair nozzle failures.
The printer performs the printhead maintenance procedure to repair
extensive nozzle failures. (
Printhead maintenance to repair extensive nozzle failures on page 253
)
Learn about printhead maintenance
250 Chapter 10 - Print what you expect