Oce VarioPrint i Series, Руководство по эксплуатации

Страница: 84 / 402

Learn about stacking behaviour
One or two high capacity stackers collect the prints and automatically eject a stack of prints.
(
Overview of the high capacity stacker on page 30
)
Below you find three stack and eject scenarios (A, B, C) for transaction and document print jobs
that you configure on the VarioPrint i-series.
A. Use the full capacity of the stack trays
2 3 1 4
[92] Transaction print job
2 3 1 4
[93] Document print job
1. The stack tray of the
first
high capacity stacker collects the prints of the first job until the
maximum stack height has been reached.
2. The eject tray of the
first
high capacity stacker ejects the first stack of job 1.
3. The stack tray of the first high capacity stacker collects the remaining prints of the first job
and first prints of the second job.
4. The stack tray of the second high capacity stacker collects the remaining prints of the second
job, because the linking of output s is enabled.
How to configure this scenario?
Settings Editor Control panel
1. Define a stack height. (
Define default stack-
ing in the high capacity stacker on page 68
)
2. Set 100% as minimum filling rate. (
Define
default stacking in the high capacity stack-
er on page 68
)
1. Specify in the workflow profile that a stack
eject occurs when the tray is full and ena-
ble the linking of output trays. (
Choose a
workflow profile on page 114
)
Learn about stacking behaviour
84 Chapter 5 - Job media handling