Oce Color System 200, Руководство оператора

Страница: 59 / 197

1-47
Color Creation
8.
Select a color.
There are four methods for selecting a color.
N
Select a color from the color palette.
(Color Palette Selection) (see p. 1-65.)
N
Select a color from the original.
(Designated Color Selection) (see p. 1-67.)
N
Select a color that was previously registered.
(Registered Color Selection) (see p. 1-69.)
N
Select a color from the color wheel.
(Color Wheel Selection) (see p. 1-70.)
After a color is selected, the Coloring Setting 1 (Coloring [1]) is set. Then,
the screen returns to the display in the Coloring Setting 2 (Coloring [2]).
9.
The next Coloring setting (Coloring [2]) can be carried
out.
When the Coloring settings have been completed, go to
step 10.
N
To continue and set Coloring setting process
1. Select the object for coloring.
2. Select the point(s).
3. Select the color.
P
To add a different color, repeat steps 4 through
8.
P
If you press the ADD/ADJUST COLORING
key, you can change / add Coloring setting that has
been set.
10.
Press the OK key to complete the Coloring.
The coloring setting process is complete.