Oce Color System 200, Руководство оператора

Страница: 132 / 197

3-24
Marker Editing (Partial Editing by Designating an Area with the Highlight Markers)
Marking Black-and-White Originals
L
Acceptable originals
N
With Marker Editing, use black-and-white originals. If color originals are
used, the editing may not be performed correctly.
N
Marks drawn on the original can not be erased. To preserve the original,
make a black single-color copy and then use the markers on that.
L
Highlight Markers
N
For best result, use Highlight Markers (red, blue, green).
N
One-point Designation and Encircled Designation can be set
for each highlight marker color. By using all three colors, a maximum of
six functions can be designated in combination.
N
If more than one marker designation has been made within the same
border, the priority assigned by the copier to the designations is as
follows:
1. Green One-point Designation
2. Blue One-point Designation
3. Red One-point Designation
4. Green Border Designation
5. Blue Encircled Designation
6. Red Encircled Designation
P
The marked area on the edge of an original
might not be recognized properly.
When designating an area with a marker, make sure
to designate it approximately
1
/
4
)
(5 mm) from the
edge of the original.