Oce Color System 200, Руководство оператора

Страница: 120 / 197

3-12
Area Designation (Using the Edit Pen)
L
Non-rectangular Area Designation
The Non-rectangular Area Designation method differs depending on the
type of non-rectangular selected area.
P
“Polygon”, “Free”, and “Tracing” can not be
specified past Area Processing [16].
Designate an area using the edit pen.
N
Designating a circle
Use the edit pen to enter the center of the circle, then enter one point on
the circumference of the circle.
P
If the OK key is pressed, the Non-rectangular
Area Designation process is completed.
N
Designating an ellipse
Use the edit pen to enter two of the opposing corners of the rectangle
that define the ellipse.
N
Designating an oval
Use the edit pen to enter two of the opposing corners of the largest
rectangle that the oval can hold.
N
Designating a rounded rectangle
Use the edit pen to enter two of the opposing corners of the largest
rectangle that the rounded rectangle can hold.