Oce Arizona T220UV, Руководство пользователя

Страница: 103 / 114

Printer Maintenance 103
Change the Electronics Bay Air Filter
Introduction
The door for entry to the electronics bay contains a grill for ventilation. The filter in this grill must be inspected periodically
and changed when needed.
Purpose
If the filter is not cleaned or changed when it becomes dirty, the buildup of heat can damage the circuit boards in the
enclosure.
Required tools
Air Filter (Part #3010043253)
Flathead screwdriver
Illustration
[44] Filter and Cover
[44] Filter and Cover
How to Access the Filter
1.
Loosen the four screws in each corner of the filter grill.
2.
Remove the grill from the door to access the filter.
3.
If the filter is dirty but otherwise undamaged, clean it using a mild solution of water and mild detergent.
4.
Thoroughly dry the filter using a cloth and/or forced air dryer.
Caution: Water must never contact any electrical devices.
5.
If the filter is damaged, replace it. Contact Océ for a replacement filter.
6.
Re-install the filter and grill.