Oce Arizona T220UV, Руководство пользователя

Страница: 104 / 114

104 T220UV User Guide
Gantry Brushes (Every Two Years)
Introduction
The Arizona T220UV printer has two brushes on the gantry that act as UV light shields. They are located behind the hinged
gates on the BG model and at the base on the gantry cover on the regular model. One is on the front and the other on the
back edge of the gantry. These brushes prevents stray UV light from emanating into the work environment by providing a
flexible barrier that at the same time accommodates media on the table up to 2" (51mm) in thickness.
Replace Brushes
Brushes must be replaced every two years, or sooner if either of these brushes gets deformed, contaminated, or altered in
any way. Call your service representative if a replacement brush is needed.
Gantry Hinged Gates (BG Model only)
The T220UV BG printer has two hinged gates located on the front and back edge of the gantry. Tripping either of the two
Hinged Gates will trigger an interlock and shut down all printer motion, requiring a reset. If the swinging motion of the
hinged gate is compromised in any way it must be replaced. Call your service representative if a replacement gate is needed.
[45] Hinged Gantry Gate
[45] Hinged Gantry Gate