Oce Arizona T220UV Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 114

background image

User Interface

39

Delete Files

The printer’s hard drive has a capacity of 70 gigabytes for storing print jobs. When the drive is full, the oldest file is
automatically removed to make more space available. The Delete Files menu lets you delete all print job files stored on the
drive. It is not possible to select particular files for deletion - using this option deletes all files (print jobs) on the drive.

Units Menu

The Units menu allows you to choose between Imperial (English) and Metric units. All control panel menus display the
preferred units. The Units menu is part of the Operator submenu.

Set Clock Menu

The Set Clock menu allows you to set the date and time. When the date and time are set, they are printed in the statistics
output.

About Printer Menu

Displays amount of media printed, firmware revision, firmware build date, firmware build time, serial number, and boot
ROM version. The About Printer menu allows you to view the current printer specifications on the printer control panel. The
same information is available in the configuration print.

Configure I/O Menu

The Arizona T220UV printer can accept input through two types of ports, Centronics parallel, and low-voltage differential
(LVD) SCSI-2 communication ports. They are built into the printer. The Active menu allows you to select the type of port -
Parallel or SCSI.

Parallel Port

The printer uses a standard Centronics-type parallel data cable to allow access for service and diagnostic purposes.

LVD-SCSI-2 Port Configuration

Océ Display Graphics Systems recommends that you use the Adaptec 29160 68- pin LVD-SCSI-2 card in the computer that
connects to the T220UV printer. The printer ships with a standard 32 foot (10 meter) 68-pin SCSI-2 data cable. It uses the
ultra SCSI settings under this menu to support/enhance the transfer speed of your computer platform when printing to the
Arizona T220 printer.

Note:

NEVER connect or disconnect SCSI cables with the printer powered On. Disconnecting powered connections can make

printer hard drives unusable.

If you have any error messages on the computer or printer display pertaining to the SCSI port, or if print jobs are not
transferred to the Print Queue, check that the SCSSI settings are exactly as indicated here:
Active: SCSI
SCSI Address: 5
Timeout: 60 seconds
Ultra SCSI: ON
Interface Cable: LVD

«
...
37
38
39
40
41
...
»

Содержание Arizona T220UV



















































































































Отзывы:

Нет отзывов

Похожие инструкции для Arizona T220UV

Бренд: GCC Technologies Страницы: 14

Бренд: Datamax Страницы: 2

Бренд: Canon Страницы: 31

Бренд: Canon Страницы: 394

Бренд: Konica Minolta Страницы: 846

Бренд: Ricoh Страницы: 278

Бренд: Ricoh Страницы: 152

Бренд: QMS Страницы: 180

Makerspace 91413

Бренд: Mooreco Страницы: 10

Бренд: Evolis Страницы: 63

Бренд: Lexmark Страницы: 8

SEH InterCon PS54a-G

Бренд: SEH Страницы: 24

Бренд: VORON Страницы: 73

Бренд: Xerox Страницы: 18

Бренд: Wasp Страницы: 2

Aficio SP 320 Series

Бренд: Ricoh Страницы: 272

Бренд: Tinkerine Studio Страницы: 17

Бренд: Oki Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды