Oce Arizona T220UV, Руководство пользователя

Страница: 65 / 114

Ink System Management 65
How to Change an Ink Bottle
Introduction
The ink bottles are located on the Ink Station tray. Ink levels for each bottle are monitored by sensors. Low ink levels are
indicated on the control panel display.
When to do
When the control panel displays an “XXX ink low” message, that particular ink should be replaced. Ink can be replaced at
any time, with one exception — Do NOT replace inks immediately after a purge since the ink pumps may be activated at
that time.
Before you begin
Safety Information - Use appropriate safety equipment — butyl gloves and eye protectors. Take precautions to avoid ink on
your skin or in your eyes.
Note:
To reduce the chance of poor image quality, do not shake the ink supply bottles before installation or during printing.
This may introduce air bubbles into the ink supply system.
Attention:
Do not use the residual ink to top up the ink in another bottle as this will introduce contaminants that collect at
the bottom of the bottle.
Attention:
Océ Display Graphics Systems accepts no liability when non-Océ ink is used. Customers using non-Océ ink
assume all risk of damage that might result. Customer agrees to waive any claims or rights they may otherwise have against
Océ Display Graphics Systems or its agents for damage and/or loss of business resulting from use of non-Océ ink.
Caution:
Be sure to read the section on Safety Guidelines before handling UV inks. Also, read the MSDS sheets supplied on
a CD with the printer Ship Kit for more detailed information on ink safety and handling.
Illustration
[16] Ink Bottles on Ink Station Tray
[16] Ink Bottles on Ink Station Tray