Oce Arizona T220UV, Руководство пользователя

Страница: 100 / 114

100 T220UV User Guide
Clean Ozone Filters
Introduction
Inspect and clean the nine ozone filters located above the fans on the gantry at least once a month, or as needed. In
environments where there is a lot of dust and debris in the air, you may need to clean them more frequently.
Purpose
Good airflow is important to the ability of the filters to absorb ozone. Dirt and dust impedes airflow.
When to do
Inspect and clean filters monthly. Replace them every two years, or sooner if they show any sign of damage.
Required tool
Shop vacuum or hand-held vacuum
Note:
Make sure that you are in an environment that will remove any dislodged dust particles from the air. Also make sure
that you don’t expose the carriage fan intake to the dust. Ideally, the filters can be cleaned in a room separate from the
printer or even outdoors.
How to Clean Ozone Filters
1.
Remove the square metal cover surrounding the ozone filter by retracting the two clips and lifting it straight up and off.
2.
Carefully lift the filter from its bracket.
3.
Note that one side of the filter has a visible layer of dust. Vacuum this dust with a handheld appliance.
4.
Replace the clean filter in its the metal cover and engage the cover in its bracket with the two clips.
How to Replace Ozone Filters
1.
Remove the square metal cover surrounding the ozone filter by retracting the two clips and lifting it straight up and off.
2.
Lift the filter from its bracket.
3.
Place the new filter in the metal cover and engage the cover in its bracket with the two clips.
Note:
Contact your Océ service representative for replacement ozone filters.