Oce Arizona T220UV, Руководство пользователя

Страница: 38 / 114

38 T220UV User Guide
Test Prints Menu - The Test Prints menu allows you the option of printing three documents stored in the Arizona T220UV
printer:
• Nozzle print (Diagnostic and Standard)
• Configuration print
• Color bars print
In the nozzle prints, breaks in the line indicate which heads are misfiring. Performing a High Purge or Recovery Purge on the
ink colors that show misfiring can help to clear the affected heads. For a more detailed explanation of how to use the nozzle
print for diagnostic purposes, refer to (see ‘
How to Reduce Banding ’ on page 52 ).
[19] Test Prints Menu
[19] Test Prints Menu
Special Prints Menu - The Special Prints menu gives you access to the Menu Tree print and the Table Grid print, either
metric or imperial version.
[20] Special Prints Menu
[20] Special Prints Menu
Print Parameters Menu
The Print Parameters menu lets you set Enable Job Parameter Changes. If this is set to ON, you can decide which of the
following options are presented to the operator prior to printing (See “Print Job Parameter Options” on page 32):
■
BiDirectional Printing - either in both directions or just right to left
■
# of Copies - print up to 100 copies of an image
■
# of Overprints - prints the image on the media up to 3 times.
Ink Menu
The Ink Menu lets you view approximately how much ink is left in each bottle and also to install new ink bottles, if required.
Component Function
NOZZLE PRINT The Nozzle Print menu provides you with a visual representation of how the print heads are firing.
COLOR BAR The Color Bars menu prints a set of color bars. The eleven color bars start with Light Magenta and
end with Black.
CONFIGURATION
PRINT The Configuration Print menu provides the operator and Océ Display Graphics Systems service
technicians with machine-settings data if the unit must be diagnosed or recalibrated. A current
configuration print for your printer should be stored for reference.
Component Function
Menu Tree Print The Print Menu Tree menu generates a print which is a graphical illustration of the T220UVsystem
menu tree. This 32 x 56 inch poster illustrates the Operator, Print Queue, and Configuration menu thus
providing you with an overview of the menu system. It also contains Safety Guidelines, a summary of
the Maintenance Schedule, and Application Tips. If the print does not show up in the Special prints
menu, or of you want to check for an updated version, the Menu Tree Print must be downloaded from
the ODGS web site and then copied to the printer. For detailed instructions, see Appendix A.
Grid Print The Table Grid is used to position media for printing. It is printed directly on the printer table. This
ensures that printed production jobs are registered with exact pixel placement. If necessary, the grid
can be cleaned off the table and reprinted. The grid file comes in two versions: metric and imperial
units.
Either the Imperial and Metric grids appear as a menu selection - Operator / Special Prints. Which one
appears depends on what was loaded (see below). Before printing the grid, make sure that you set the
height to 0 (zero) and also when the display prompts to set the pre-fire strip catcher height, remove any
media or other spacing material from the slot in the catcher.
If the Grid does not appear as a menu option, it must be downloaded from the ODGS web site and then
copied to the printer. For detailed instructions, see Appendix A.