manualshive.com logo in svg

NXP Semiconductors PN7360AUEV, Руководство пользователя

NXP Semiconductors PN7360AUEV - инновационный продукт, который позволяет управлять электронными устройствами с удобством и безопасностью. Для получения подробной информации, скачайте бесплатное руководство пользователя с manualshive.com. Узнайте, как использовать этот продукт на максимуме его возможностей!

Поделиться
Скачать
background image

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

 

  

 

NXP Semiconductors 

UM10858 

 

PN7462 family HW user manual 

UM10858 

All information provided in this document is subject to legal disclaimers. 

© NXP B.V. 2018. All rights reserved. 

User manual                                                                                   
COMPANY PUBLIC 

Rev. 1.4 — 14 May 2018                                                                               

314514 

334 of 345 

17.  Legal information

17.1  Definitions 

Draft — 

The document is a draft version only. The content is still under 

internal review and subject to formal approval, which may result in 
modifications or additions. NXP Semiconductors does not give any 
representations or warranties as to the accuracy or completeness of 
information included herein and shall have no liability for the consequences 
of use of such information. 

17.2  Disclaimers 

Limited warranty and liability — 

Information in this document is believed to 

be accurate and reliable. However, NXP Semiconductors does not give any 
representations or warranties, expressed or implied, as to the accuracy or 
completeness of such information and shall have no liability for the 
consequences of use of such information. 

In no event shall NXP Semiconductors be liable for any indirect, incidental, 
punitive, special or consequential damages (including - without limitation - 
lost profits, lost savings, business interruption, costs related to the removal 
or replacement of any products or rework charges) whether or not such 
damages are based on tort (including negligence), warranty, breach of 
contract or any other legal theory. 

Notwithstanding any damages that customer might incur for any reason 
whatsoever, NXP Semiconductors’ aggregate and cumulative liability 
towards customer for the products described herein shall be limited in 
accordance with the Terms and conditions of commercial sale of NXP 
Semiconductors. 

Right to make changes — 

NXP Semiconductors reserves the right to make 

changes to information published in this document, including without 
limitation specifications and product descriptions, at any time and without 
notice. This document supersedes and replaces all information supplied prior 
to the publication hereof. 

Suitability for use — 

NXP Semiconductors products are not designed, 

authorized or warranted to be suitable for use in life support, life-critical or 
safety-critical systems or equipment, nor in applications where failure or 
malfunction of an NXP Semiconductors product can reasonably be expected 
to result in personal injury, death or severe property or environmental 
damage. NXP Semiconductors accepts no liability for inclusion and/or use of 
NXP Semiconductors products in such equipment or applications and 
therefore such inclusion and/or use is at the customer’s own risk.  

Applications — 

Applications that are described herein for any of these 

products are for illustrative purposes only. NXP Semiconductors makes no 
representation or warranty that such applications will be suitable for the 
specified use without further testing or modification.  

Customers are responsible for the design and operation of their applications 
and products using NXP Semiconductors products, and NXP 
Semiconductors accepts no liability for any assistance with applications or 
customer product design. It is customer’s sole responsibility to determine 
whether the NXP Semiconductors product is suitable and fit for the 
customer’s applications and products planned, as well as for the planned 
application and use of customer’s third party customer(s). Customers should 
provide appropriate design and operating safeguards to minimize the risks 
associated with their applications and products.  

NXP Semiconductors does not accept any liability related to any default, 
damage, costs or problem which is based on any weakness or default in the 
customer’s applications or products, or the application or use by customer’s 
third party customer(s). Customer is responsible for doing all necessary 
testing for the customer’s applications and products using NXP 
Semiconductors products in order to avoid a default of the applications and 
the products or of the application or use by customer’s third party 
customer(s). NXP does not accept any liability in this respect.

Export 

control — 

This document as well as the item(s) described herein may be 

subject to export control regulations. Export might require a prior 
authorization from competent authorities. 

Evaluation products — 

This product is provided on an “as is” and “with all 

faults” basis for evaluation purposes only. NXP Semiconductors, its affiliates 
and their suppliers expressly disclaim all warranties, whether express, 
implied or statutory, including but not limited to the implied warranties of non-
infringement, merchantability and fitness for a particular purpose. The entire 
risk as to the quality, or arising out of the use or performance, of this product 
remains with customer. 

In no event shall NXP Semiconductors, its affiliates or their suppliers be 
liable to customer for any special, indirect, consequential, punitive or 
incidental damages (including without limitation damages for loss of 
business, business interruption, loss of use, loss of data or information, and 
the like) arising out the use of or inability to use the product, whether or not 
based on tort (including negligence), strict liability, breach of contract, breach 
of warranty or any other theory, even if advised of the possibility of such 
damages.  

Notwithstanding any damages that customer might incur for any reason 
whatsoever (including without limitation, all damages referenced above and 
all direct or general damages), the entire liability of NXP Semiconductors, its 
affiliates and their suppliers and customer’s exclusive remedy for all of the 
foregoing shall be limited to actual damages incurred by customer based on 
reasonable reliance up to the greater of the amount actually paid by 
customer for the product or five dollars (US$5.00). The foregoing limitations, 
exclusions and disclaimers shall apply to the maximum extent permitted by 
applicable law, even if any remedy fails of its essential purpose. 

17.3  Licenses 

Purchase of NXP ICs with NFC technology 

Purchase of an NXP Semiconductors IC that complies with one of the Near 
Field Communication (NFC) standards ISO/IEC 18092 and ISO/IEC 21481 
does not convey an implied license under any patent right infringed by 
implementation of any of those standards. Purchase of NXP 
Semiconductors IC does not include a license to any NXP patent (or other 
IP right) covering combinations of those products with other products, 
whether hardware or software. 

Purchase of NXP ICs with ISO 14443 type B functionality 

 

This NXP Semiconductors IC is ISO/IEC 14443 Type 
B software enabled and is licensed under Innovatron’s 
Contactless Card patents license for ISO/IEC 14443 
B.  

The license includes the right to use the IC in systems 
and/or end-user equipment. 

RATP/Innovatron 
Technology

 

 

17.4  Trademarks 

Notice: All referenced brands, product names, service names and 
trademarks are property of their respective owners. 

MIFARE —

 is a trademark of NXP B.V. 

MIFARE Classic —

 is a trademark of NXP B.V. 

MIFARE Plus —

 is a trademark of NXP B.V. 

I²C-bus logo

 

—

 is a trademark of NXP B.V 

ICODE 

 — is trademark of NXP B.V.

Содержание PN7360AUEV


























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PN7360AUEV

S&C 6800 Series Instruction Sheet preview
6800 Series
Бренд: S&C Страницы: 40
S-COM 7K Manual preview
7K
Бренд: S-COM Страницы: 400
iluminize 5110 V1 Manual preview
5110 V1
Бренд: iluminize Страницы: 2
HW Group HWg-SH3 Manual preview
HWg-SH3
Бренд: HW Group Страницы: 18
Linear Technology LTC3703 Manual preview
LTC3703
Бренд: Linear Technology Страницы: 32
Sparkfun Electronics Explorer Dongle Manual preview
Explorer Dongle
Бренд: Sparkfun Electronics Страницы: 16
Variotech ENA3 Manual preview
ENA3
Бренд: Variotech Страницы: 24
Giesecke & Devrient StarSign Bio Token 3.0 M Reference Manual preview
StarSign Bio Token 3.0 M
Бренд: Giesecke & Devrient Страницы: 28
PI PICMA P-810 Short Instructions preview
PICMA P-810
Бренд: PI Страницы: 6
Jebao AQLink A1 Quick Start Manual preview
AQLink A1
Бренд: Jebao Страницы: 4
CLS LDV-45 Manual preview
LDV-45
Бренд: CLS Страницы: 6
Bardac PLX Product Manual preview
PLX
Бренд: Bardac Страницы: 235
Bamo BAMOPHOX 436 E Instruction Manual preview
BAMOPHOX 436 E
Бренд: Bamo Страницы: 12
RJX Hobby seriously pro User Manual preview
seriously pro
Бренд: RJX Hobby Страницы: 11
SLV 470674 Operating Manual preview
470674
Бренд: SLV Страницы: 12
ICP DAS USA ISaGRAF VP-23W7 User Manual preview
ISaGRAF VP-23W7
Бренд: ICP DAS USA Страницы: 192
Viking C-2000B Product Manua preview
C-2000B
Бренд: Viking Страницы: 24
Cooper & Hunter LH-13001 Manual preview
LH-13001
Бренд: Cooper & Hunter Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды