Nortel Meridian Meridian 1, Планирование, установка и инструкции по эксплуатации, Страница: 96 / 556

Chapter 8 – Installing a new system Page 77 of 536
Option 11C Compact Planning, Installation, Fault Clearing and CCBR Guide
13 Install (if not previously installed) and activate the telephones.
Refer to
“Chapter 17 – Connecting the telephones and attendant
console” on page 157 .
Note: Make sure that user guides provided with telephone sets are
left with the telephone. This ensures that the telephone set user will
understand how to use the features provided by the Option 11C
Compact system.
Use the administration telephone to set the default models and default
numbering plan.
Configure any custom telephone models which may be required.
Make sure the wiring to each telephone is properly connected.
Make sure all the telephones are in their correct location.
Make sure that user guides provided with telephone sets are left with
the telephone.
Make sure that all the required feature key caps are installed on the
phones.
Make sure that the correct features are assigned to each telephone
and are functioning.
14 Connect the trunks to the system as described in
“Chapter 18 – Connecting the trunks” on page 179 .
Make sure that the wiring to each trunk is properly connected.
Make sure that the trunks are correctly assigned.
Make sure that all the trunks are working properly.
15 Perform a system backup, using overlay 43.
Dump or copy the configuration data to the primary and backup flash
drives using the EDD command
16 Install any remaining equipment, such as external alarms (Refer
to
“Chapter 19 – Connecting an external alarm” on page 191 ) and
the Meridian Mail feature ( “Chapter 20—Meridian Mail Compact
Option installation and maintenance” on page 191 ).
17 Replace cabinet covers.
—————————— End of Procedure ——————————