Nortel Meridian Meridian 1, Планирование, установка и инструкции по эксплуатации, Страница: 543 / 556

Page 524 of 536 Chapter 25 — Fault locating and clearing
553-3121-210 Standard 3.0 January 1999
• Wiring to the telephone
Possible cause Action
Fault on other
equipment Check with the user to determine if the fault is present only on
• certain types of calls (such as on a paging trunk or a Tie trunk)
• calls to a specific location
• calls to a specific telephone or other piece of equipment (such as
a modem or Fax machine)
If the fault occurs only with certain calls, take the appropriate action.
If the fault occurs on all calls, go to the next possible cause.
Defective handset Check the receiver or transmitter in the handset. If one is defective,
replace the handset or, if necessary, the telephone.
Defective telephone Disconnect the telephone from the jack. Plug in another telephone
of the same type.
If the replacement telephone works, replace the telephone you
removed.
If the replacement telephone does not work, reconnect the original
telephone and go to the next possible cause.
Note: If the telephone is a Meridian Digital Telephone, enter
LD 32
IDU c u
If there is no response, replace the telephone.
—continued—