Nortel Meridian Meridian 1, Планирование, установка и инструкции по эксплуатации

Страница: 448 / 556

Chapter 24 – Changing pre-programmed data Page 429 of 536
Option 11C Compact Planning, Installation, Fault Clearing and CCBR Guide
Creating digital telephone models
When creating telephone models for digital telephones, key 0 must be
programmed with a function that can act as a prime extension number or its
equivalent. This includes telephones that are programmed to have Single Call
Ringing (SCR), Multiple Call Ringing (MCR), Single Call Non-Ringing
(SCN), Multiple Call Non-Ringing (MCN), and Automatic Call Distribution
(ACD).
For ACD telephones, the telephone model defines the ACD queue. To define
the extension number, enter the ID number of the agent or the Central
Answering Position.
The following information must be entered in LD 11 in order to create a
digital telephone model:
LD 11
REQ NEW
TYPE 2XXX M or 3000 M “XXX” = allowed telephone types
MODL YYY “YYY” = the model number of the
telephone that you are creating
(between 1 - 127)
Enter the responses to the remaining prompts in order to complete the new
model. (Refer to the Option 11C Compact Software guides for a complete list
of prompts and possible responses).
Modifying digital telephone models
To modify a digital telephone, load LD 11 and enter the following
information:
LD 11
REQ CHG
TYPE 2XXX M or 3000 M “XXX” = allowed telephone types
MODL YYY “YYY” = the model number of the
telephone that you are modifying