Nidec Digitax HD M753 EtherCAT, Руководство пользователя, Страница: 174 / 262

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
EtherCAT
interface
SD Card
Operation
Onboard
PLC
Advanced
parameters
Diagnostics
UL listing
information
174
Digitax HD M753 Control User Guide
Issue Number: 3
Parameter
Range(  ) Default(  )
Type
OL RFC-A RFC-S OL RFC-A RFC-S
05.001 Output Frequency
VM_SPEED_
FREQ_REF
±2000.0 Hz RO Num ND NC PT FI
05.002 Output Voltage 0 to VM_AC_VOLTAGE V RO Num ND NC PT FI
05.003 Output Power VM_POWER kW RO Num ND NC PT FI
05.004 Motor Rpm ±180000 rpm RO Num ND NC PT FI
05.005 D.c. Bus Voltage 0 to VM_DC_VOLTAGE V RO Num ND NC PT FI
05.006 Rated Frequency 0.0 to 550.0 Hz
50Hz: 50.0
60Hz: 60.0
RW Num US
05.007 Rated Current 0.000 to VM_RATED_CURRENT A Maximum Heavy Duty Rating (11.032) RW Num RA US
05.008 Rated Speed 0 to 33000 rpm 0.00 to 33000.00 rpm
50Hz: 1500
rpm
60Hz: 1800
rpm
50Hz:
1450.00 rpm
60Hz:
1750.00 rpm
3000.00 rpm RW Num US
05.009 Rated Voltage 0 to VM_AC_VOLTAGE_SET
200 V drive: 230 V
50 Hz - 400 V drive: 400 V
60 Hz - 400 V drive: 460 V
575 V drive: 575 V
690 V drive: 690 V
RW Num RA US
05.010 Rated Power Factor 0.000 to 1.000 0.850 RW Num RA US
05.011 Number Of Motor Poles Automatic (0) to 480 Poles (240) Automatic (0) 6 Poles (3) RW Num US
05.012 Autotune 0 to 2 0 to 4 0 to 5 0 RW Num NC US
05.013
Dynamic V To F Select Off (0) or On (1) Off (0) RW Bit US
Flux Optimization Select Off (0) or On (1) Off (0) RW Bit US
05.014
Open-loop Control Mode
Ur S (0), Ur (1),
Fixed (2),
Ur Auto (3),
Ur I (4),
Square (5),
Ur I (4) RW Txt US
Phasing Test On Enable
Disabled (0),
Short, (1),
Short Once (2),
Long (3),
Long Once (4)
Disabled (0) RW Txt US
05.015
Low Frequency Voltage Boost 0.0 to 25.0 % 1 % RW Num US
Minimal Movement Phasing Test Current
1 % (0),
2 % (1),
3 % (2), 6 % (3),
12 % (4),
25 % (5),
50 % (6),
100 % (7)
1 % (0) RW Txt US
05.016
Rated Speed Optimization Select
Disabled (0),
Classic Slow (1),
Classic Fast (2),
Combined (3),
VARs Only (4),
Voltage Only (5)
Disabled (0) RW Txt US
Minimal Movement Phasing Test Angle 0.00 to 25.00° 0.00° RW Num US
05.017 Stator Resistance 0.000000 to 1000.000000 Ω 0.000000 Ω RW Num RA US
05.018 Maximum Switching Frequency
2 kHz (0), 3 kHz (1), 4 kHz (2), 6 kHz (3), 8 kHz (4),
12 kHz (5), 16 kHz (6)
8 kHz (4) RW Txt RA US
05.019
High Stability Space Vector Modulation Off (0) or On (1) Off (0) RW Bit US
Rated Speed Optimization Minimum
Frequency
0 to 100 % 10 % RW Num US
05.020
Quasi-square Enable Off (0) or On (1) Off (0) RW Bit US
Rated Speed Optimization Minimum Load 0 to 100 % 50 % RW Num US
05.021 Mechanical Load Test Level 0 to 100 % 0 % RW Num US
05.022 Enable High Speed Mode
Limit (-1),
Disable (0),
Enable (1)
Disable (0) RW Txt US
05.024
Transient Inductance 0.000 to 500.000 mH 0.000 mH RW Num RA US
Ld
0.000 to 500.000
mH
0.000 mH RW Num RA US
05.025 Stator Inductance 0.00 to 5000.00 mH 0.00 mH RW Num RA US
05.026 High Dynamic Performance Enable Off (0) or On (1) Off (0) RW Bit US
05.027
Enable Slip Compensation Off (0) or On (1) On (1) RW Bit US
Flux Control Gain 0.1 to 10.0 1.0 1.0 RW Num US
05.028
Flux Compensation 0 to 2 0 RW Num US
Torque Linearization Disable Off (0) or On (1) On (1) RW Bit US
05.029 Saturation Breakpoint 1 0.0 to 100.0 % 50.0 % RW Num US
05.030 Saturation Breakpoint 3 0.0 to 100.0 % 75.0 % RW Num US
05.031 Voltage Controller Gain 1 to 30 1 RW Num US