Replication Information
Clicking
RAID Information > Volume Replicate
takes you to the
Replication Information
page, which
displays outgoing and incoming replication information for the Nexsan High-Density Storage system.
Note
For detailed information regarding the snapshots and replication features of Nexsan High-Density
Storage units, see the
Nexsan High-Density Storage Snapshots and Replication User Guide
.
Outbound replications are displayed in the
Outbound Replications
section:
Figure 3-33:
Replication Information
page (with
Outbound Replications
section only)
The
Outbound Replication
section contains the following information:
The
Source Volume Details
column displays information for each configured volume on the unit: the
volume number, volume name, the
Array
to which it is assigned, the number of the
Controller
to which the
array is assigned, the
Enclosure
on which the array resides, and the total
Capacity
of the volume.
The
Replication Status
column displays one of the following:
The message
Not configured
.
OR
The replication
Status
, the
Replication partner
, and the time and date of the
Latest recovery point
.
If one or more inbound replications are configured, the
Inbound Replications
section is displayed:
Figure 3-34:
Replication Information
page (with
Inbound Replications
section)
Chapter 3: The Graphical User Interface — RAID Information
Nexsan High-Density Storage
User Guide
87