Nexsan BEAST Series, Руководство пользователя, Страница: 164 / 267

Link speed : Select 2Gbit , 4Gbit , 8Gbit , 16Gbit , or AUTO (the default) from the drop-down list.
Note The available link speed options may vary by model.
Host port cleanup : This option is only used in full-fabric topologies where RSCN notification (a
switch function which can inform other devices on the FC fabric that a host has been disconnected
without logging off) is enabled on the connected Fibre switch. Select
No if you are not using a full-
fabric topology or if RSCN notification is disabled. Select Yes if you are using a full-fabric topology
with RSCN notification.
Note If at any time you wish to return the Configure Fibre page to its initial state, click Reset .
2. When you have selected the desired new settings, do one of the following:
Click Save Configuration . The settings are saved and are applied after the system is restarted (see
Reboot System on page 194).
Click Save and Apply Changes . The settings are saved and applied immediately.
Chapter 3: The Graphical User Interface — Configure Host Access
Nexsan High-Density Storage
User Guide
www.nexsan.com
164