Nexsan BEAST Series, Руководство пользователя, Страница: 211 / 267

Assign IP Address : You can choose whether to Use DHCP (Dynamic Host Configuration Protocol) or
Use Static IP .
If you select Use DHCP , then no other configuration is needed.
Note In order to use DHCP, your network must be configured for DHCP. If it is not, you MUST use a static
IP address.
If you select Use Static IP , then you must fill in the Static IP Address and Subnet Mask . If you wish to
use the E-Alert feature (see E-Alert Settings on the next page) or use a time server (see Configure time and
date on page 216), you may also need to fill in values for Gateway , Primary DNS , and Secondary DNS .
Note If at any time you wish to return the Configure Network Settings page to its initial state, click Reset .
When you have selected the desired new settings, do one of the following:
Click Save Configuration . The settings are saved and are applied after the system is restarted (see
Reboot System on page 194).
Click Save and Apply Changes . The settings are saved and applied immediately.
Chapter 3: The Graphical User Interface — Configure Network
Nexsan High-Density Storage
User Guide
www.nexsan.com
211