from the unit without the corresponding encryption key. If this option is selected, you will be prompted to
download the encryption key once the array has been created.
8. Select the check box beneath each available disk that you would like to include in the array. You must
select a minimum of two disks for RAID 0 or RAID 1/1+0, a minimum of three disks for RAID 4 or RAID
5, or a minimum of four disks for RAID 6.
Note
There is a section below the
Create RAID Set
button that allows you to select a section of disks all
at once. Click the check box next to
Disk
N
through
N
for each group of disks that you wish to select.
Note
If at any time you wish to return the array creation tool to its initial state, click
Reset
.
9. Click the
Create RAID Set
button.
If you are not creating an encrypted array, skip the next step.
Chapter 3: The Graphical User Interface — Configure RAID
Nexsan High-Density Storage
User Guide
117