Configure the Nexsan High-Density Storage unit’s IP address
This procedure requires that the Nexsan High-Density Storage unit be connected to the LAN via an Ethernet
cable attached to its management port (
MGMT
) (see the unit’s
Installation Guide
for details).
1. Launch the IP Configuration Tool according to the method of your operating system.
The
Nexsan IP Configuration Tool
opens. If the new Nexsan High-Density Storage unit is already
attached to the same broadcast network, the
New RAID system detected
dialog is displayed.
Figure 1-3:
New RAID system detected
dialog
Click
Yes
.
The dialog closes, and the Nexsan High-Density Storage units are displayed in the
RAID Systems
list.
Chapter 1: Basic Setup — Initial network address setup
Nexsan High-Density Storage
User Guide
18