Nexsan BEAST Series, Руководство пользователя, Страница: 48 / 267

9. Set access privileges for individual hosts by checking or unchecking the box in the Use Default column:
If Use Default is checked, the host or host group will use the Group Default setting (if the host is part
of a group) or the Default Access setting (if the host is not part of a group). This is the default setting.
If Use Default is unchecked, this setting overrides the Group Default and Default Access settings.
Select Deny , Read , or R/W to set the access privileges for the specific host.
Note If at any time you wish to return the Map Logical Volumes page to its initial state, click Reset .
10. When you have finished assigning host access privileges, click Apply Changes . A message is
displayed, indicating that the settings have been saved.
Note For more information about host access, see Configure Host Access on page 162.
Chapter 2: Common Tasks — Configure volumes on a RAID array
Nexsan High-Density Storage
User Guide
www.nexsan.com
48