manualshive.com logo in svg

Netopia 4000 Series, Руководство пользователя программного обеспечения

Установочный и обслуживающий мануал для продукции Lawler 4000 Series доступен для загрузки бесплатно на нашем сайте. Здесь вы найдете все необходимые инструкции по установке и обслуживанию продукта. Необходимо загрузить мануал с {веб-сайта}, чтобы получить полезные сведения о продукте.

Поделиться
Скачать
background image

IP Setup   6-3

The Netopia Firmware Version 5.4 suppor ts multiple IP subnets on the Ethernet inter face. You may want to 
configure multiple IP subnets to ser vice more hosts than are possible with your primar y subnet. It is not 
always possible to obtain a larger subnet from your ISP. For example, if you already have a full Class C 
subnet, your only option is multiple Class C subnets, since it is vir tually impossible to justify a Class A or 
Class B assignment.

If you are using NAT, you can use the reser ved Class A or Class B subnet.

■

Select 

Default IP Gateway

 and enter the IP address for a default gateway. This can be the address of any 

major router accessible to the Router.

A default gateway should be able to successfully route packets when the Router doesn’t know how to route 
to the intended recipient’s IP address. Typically, a default gateway is the ISP’s router.

■

If a backup gateway is available, select 

Backup IP Gateway

 and enter the IP address of a gateway that you 

want to use for backup in the event of a connection failure. See 

“Backup Default Gateway” on page 7-13

 

for configuration details.

■

Select 

Primary Domain Name Server

 and enter the IP address for a domain name ser ver. The domain 

name ser ver matches the alphabetic addresses favored by people (for example, robin.hood.com) to the IP 
addresses actually used by IP routers (for example, 163.7.8.202). 

■

If a secondar y DNS ser ver is available, select 

Secondary Domain Name Server

 and enter its IP address. 

The secondar y DNS ser ver is used by the Router when the primar y DNS ser ver is inaccessible. Entering a 
secondar y DNS is useful but not necessar y.

■

Select 

Domain Name

 and enter your network’s domain name (for example, netopia.com). Netopia strongly 

recommends that you enter a domain name.

■

Routing Information Protocol (RIP) is needed if there are IP routers on other segments of your Ethernet 
network that the Router needs to recognize. If this is the case select 

RIP Options

 and press Return. This 

will take you to the Ethernet LAN RIP options screen, where you can configure several parameters, 
including RIP v2 MD5 Authentication. See 

“RIP-2 MD5 Authentication” on page 6-10

.

■

With Receive RIP set to v1, the Ethernet por t will accept routing information provided by RIP packets 
from other routers that use the same subnet mask. Set to v2, the router will accept routing informa-
tion provided by RIP packets from other routers that use different subnet masks. Set to Both, the 
router will accept information from either RIP v1 or v2 routers.

■

With Transmit RIP v1 selected, the router will generate RIP packets only to other RIP v1 routers. With 
Transmit RIP v2 (broadcast) selected, the router will generate RIP packets to all other hosts on the net-
work. With Transmit RIP v2 (multicast) selected, the router will generate RIP packets only to other rout-
ers capable of recognizing RIP v2 packets.

■

If you want to enable Multicast For warding, select 

Multicast Forwarding

 and from the pop-up menu, 

choose the type that you want to enable. See 

“Multicast For warding” on page 6-34

 for detailed 

configuration.

If you enable Multicast For warding, the next field 

IGMP Version

 appears. You can choose v1 or v2 from the 

pop-up menu.

■

Select 

Static Routes

 to manually configure IP routes. See the section 

“Static routes,”

 below.

■

If you select 

IP Address Serving

 you will be taken to the IP Address Ser ving screen (see 

“IP Address 

Ser ving” on page 6-17

). Since no two hosts can use the same IP address at the same time, make sure 

Содержание 4000 Series



























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 4000 Series

Panasonic BB-HGW700A - Network Camera Router Installation/Troubleshooting Manual preview
BB-HGW700A - Network Camera Router
Бренд: Panasonic Страницы: 10
Lantronix SISPM1040-582-LRT Quick Start Manual preview
SISPM1040-582-LRT
Бренд: Lantronix Страницы: 2
Lantronix SDS1101 Quick Start Manual preview
SDS1101
Бренд: Lantronix Страницы: 7
Lantronix Maestro E220 Series Quick Start Manual preview
Maestro E220 Series
Бренд: Lantronix Страницы: 25
Obihai OBi110 Quick Start Manual preview
OBi110
Бренд: Obihai Страницы: 2
T&D RTR-50 User Manual preview
RTR-50
Бренд: T&D Страницы: 122
Zonet ZFS3008 Installation Manual preview
ZFS3008
Бренд: Zonet Страницы: 8
E-Tech Wireless Mini PCI Module User Manual preview
Wireless Mini PCI Module
Бренд: E-Tech Страницы: 42
US Robotics USR8700 Quick Installation Manual preview
USR8700
Бренд: US Robotics Страницы: 36
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Бренд: BSD Networks Страницы: 7
ZyXEL Communications XGS4700 Series Manual preview
XGS4700 Series
Бренд: ZyXEL Communications Страницы: 485
Compaq StorageWorks AIT 35GB AutoLoader Overview And Installation preview
StorageWorks AIT 35GB AutoLoader
Бренд: Compaq Страницы: 4
Zhone IMACS Network Device Product Manual preview
IMACS Network Device
Бренд: Zhone Страницы: 114
Maipu SM3100-28TC-AC Install Manual preview
SM3100-28TC-AC
Бренд: Maipu Страницы: 19
Asante IntraSwitch 5324MT Quick Installation Manual preview
IntraSwitch 5324MT
Бренд: Asante Страницы: 2
CTC Union Skywave Instruction preview
Skywave
Бренд: CTC Union Страницы: 12
ICP DAS USA WF-2572M User Manual preview
WF-2572M
Бренд: ICP DAS USA Страницы: 26
Avaya VSP 8284XSQ-AC Quick Install Manual preview
VSP 8284XSQ-AC
Бренд: Avaya Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды