manualshive.com logo in svg

Netopia 4000 Series, Руководство пользователя программного обеспечения

Установочный и обслуживающий мануал для продукции Lawler 4000 Series доступен для загрузки бесплатно на нашем сайте. Здесь вы найдете все необходимые инструкции по установке и обслуживанию продукта. Необходимо загрузить мануал с {веб-сайта}, чтобы получить полезные сведения о продукте.

Поделиться
Скачать
background image

2-8  Firmware User Guide

default setting is 1 (one). Press Return.

Note:

You can change the First DS0 Channel number, which has a valid range from one to the maximum 

number minus the number of active channels. If the number of active DS0 channels is 24 (maximum), 

First 

DS0 Channel

 is hidden.

If you specify a number of DS0 channels less than the maximum, a Contiguous Channels item appears. For 
fractional-T1, you can specify whether the DS0 channels are contiguous or alternating by toggling 

Contiguous Channels

 to 

Yes

 or 

No

.

■

Select 

Buildout (-dB) 

and press Return. From the pop-up menu, highlight the line buildout, which is the 

transmit attenuation of the line that you will be using. The choices in the menu include 

Auto

, 

0-0.6

, 

7.5

, 

15

.

0

, 

22.5

, and 

None

. The default setting is 0-0.6. Press Return. 

If Automatic is chosen, the attenuation of the transmission will be set to match the receiving signal level.

■

Select 

Channel Data Rate 

and highlight the data rate specified by your ser vice provider. The channel data 

rate choices are 

Nx56k

 or 

Nx64k

. The default is Nx64k. Press Return.

■

Select 

Data Link Encapsulation

 and highlight the method of encapsulation that you want to use from the 

pop-up menu. The choices offered are 

PPP

, 

HDLC 

(Cisco), 

RFC 1483

, and 

Frame Relay

. The default setting 

is Frame Relay. Press Return.

The screen will offer different options depending on your selection.

                             T1 Line Configuration

         Operation Mode...                  Normal
         Line Encoding...                   B8ZS
         Framing Mode...                    ESF

         Number of DS0 Channels:            1
         First DS0 Channel:                 1

         Channel Data Rate...               Nx64k

         Data Link Encapsulation...         RFC1483
         RFC1483 Mode...                    Bridged 1483
         PPP over Ethernet (PPPoE):         Off

         TO MAIN MENU                       NEXT SCREEN

Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.

                             T1 Line Configuration

         Operation Mode...                  Normal
         Line Encoding...                   B8ZS
         Framing Mode...                    ESF

         Number of DS0 Channels:            1
         First DS0 Channel:                 1

         Channel Data Rate...               Nx64k

         Data Link Encapsulation...         PPP
         PPP Mode...                        VC Multiplexed

         TO MAIN MENU                       NEXT SCREEN

Return/Enter takes you back to previous screen.
Enter Information supplied to you by your telephone company.

PPP Options

Frame Relay Options

                             T1 Line Configuration

         Operation Mode...                  Normal
         Line Encoding...                   B8ZS
         Framing Mode...                    ESF

         Number of DS0 Channels:            1
         First DS0 Channel:                 1

         Channel Data Rate...               Nx64k

         Data Link Encapsulation...         Frame Relay
         PPP over Frame Relay Enabled:      On
         DLCI:                              16
         LMI:                               None

         TO MAIN MENU                       NEXT SCREEN

Return/Enter takes you back to previous screen.
Enter Information supplied to you by your telephone company.

RFC 1483 Options

                             T1 Line Configuration

         Operation Mode...                  ATM
         Line Encoding...                   B8ZS
         Framing Mode...                    ESF

         Number of DS0 Channels:            1
         First DS0 Channel:                 1

         Data Link Encapsulation...         RFC1483
         RFC1483 Mode...                    Bridged 1483
         PPP over Ethernet (PPPoE):         Off
         Data Circuit VPI (0-255):          0
         Data Circuit VCI (32-65535):       35

         TO MAIN MENU                       NEXT SCREEN

Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.

ATM Operation Mode Options

Содержание 4000 Series



























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 4000 Series

Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Бренд: Canon Страницы: 30
D-Link PowerLine DHP-W611AV User Manual preview
PowerLine DHP-W611AV
Бренд: D-Link Страницы: 78
JCG Q5 Quick Installation Manual preview
Q5
Бренд: JCG Страницы: 3
National Instruments Module NI PXI-8250 User Manual preview
Module NI PXI-8250
Бренд: National Instruments Страницы: 39
Obihai OBi110 Quick Start Manual preview
OBi110
Бренд: Obihai Страницы: 2
T&D RTR-50 User Manual preview
RTR-50
Бренд: T&D Страницы: 122
D-Link G416 User Manual preview
G416
Бренд: D-Link Страницы: 176
?omtime CT-Router LAN User Manual preview
CT-Router LAN
Бренд: ?omtime Страницы: 62
H3C S12500R-2L Installation, Quick Start preview
S12500R-2L
Бренд: H3C Страницы: 26
US Robotics USR8700 Quick Installation Manual preview
USR8700
Бренд: US Robotics Страницы: 36
American Megatrends StorTrends 1312-P Specifications preview
StorTrends 1312-P
Бренд: American Megatrends Страницы: 2
Justec JDR454WV4 User Manual preview
JDR454WV4
Бренд: Justec Страницы: 61
Eaton SONiX Pm10 Technical Manual preview
SONiX Pm10
Бренд: Eaton Страницы: 14
CalAmp Viper 100 User Manual preview
Viper 100
Бренд: CalAmp Страницы: 115
NBase NH 210 Installation And User Manual preview
NH 210
Бренд: NBase Страницы: 18
Gearlinx NR4400 Series User'S Quick Start Manual preview
NR4400 Series
Бренд: Gearlinx Страницы: 23
Zhone ETHX-2214-DS3 Installation Instructions Manual preview
ETHX-2214-DS3
Бренд: Zhone Страницы: 28
Stahl HFisolator 9730/26-11 Operating Instructions preview
HFisolator 9730/26-11
Бренд: Stahl Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды