background image

 

1-4  Firmware User Guide

 

Connecting through a Telnet Session

 

Features of the Netopia Firmware Version 5.4 can be configured through the console screens.

Before you can access the console screens through Telnet, you must have:

 

 

A network connection locally to the router or IP access to the router.

 

Note:

 

Alternatively, you 

 

may

 

 have a direct serial console cable connection using a provided console cable and 

the Console por t on the back of the router. Some models do not have a console por t. For more information on 

 

attaching the console cable, see 

“Connecting a Console Cable to your Equipment” on page 1-5

.

 

 

Telnet software installed on the computer you will use to configure the router

 

Configuring Telnet  software

 

If you are configuring your device using a Telnet session, your computer must be running a Telnet software 
program.

 

 

If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet 
from the Star t menu.

 

 

If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the Netopia CD. 
You install NCSA Telnet by simply dragging the application from the CD to your hard disk. Mac OS X users 
can run Telnet in the Terminal application, found in the Mac OS X Utilities folder.

Содержание 4000 Series



























































































































































































































































































































Отзывы: