Installing Windows Server 2003 x64 Editions D-3
About the System Partition Size
The size for the partition that the system is to be installed can be calculated from the following
formula.
Size necessary to install the system + Paging File Size + Dump File Size
+ Application Size
Size necessary to install the system = 4100MB (Windows Server 2003 x64 Editions)
= 4100MB (Windows Server 2003 x64 Editions with
Service Pack2)
= 5900MB (Windows Server 2003 x64 Ed
Service Pack 2 CD-ROM)
Paging File Size (Recommended) = Mounted Memory Size × 1.5
Dump file Size
= Mounted Memory Size + 1MB
Application Size
= Required Size
IMPORTANT:
The above-mentioned paging file size is recommended for
collecting debug information (memory dump). The paging file with
initial size large enough to store the dump file in the boot drive is
required.
Correct debug information might not be able to be collected due to
virtual memory shortage when the paging file is insufficient, so set
an enough size of the paging file with the entire system.
Regardless of the size of the mounted memory, or the Write
debugging information (type of memory dump), the maximum size
of the dump file is 'The size of the mounted 1MB'.
If you install any application program or the like, add necessary
space to the partition to install these programs.
For example, if the mounted memory size is 512MB, the partition size will be calculated by the
above formula as follows:
(512MB * 1.5) + (512MB + 1MB) + Application Size
= Application Size
Dividing into the partition of the recommended size into multiple disks as written below will solve
problem that it cannot be reserved in one disk.
1.
Set the "Size required for instal Paging file size".
2.
See Chapter 5 and set that debugging information (equivalent to the dump file size) is to
be written to a separate disk.
(If the disk does not have enough free space to enable the dump file size to be written,
then after installing the system using the "Size required for instal Paging file size",
install an additional new disk.)
Содержание Express5800/140Rf-4
