NEC Express5800/140Rf-4, Руководство пользователя

Страница: 391 / 461

9-58 Upgrading Your Server
9.
Push the DIMM straight into the socket.
IMPORTANT:
To avoid damaging the lever, do not apply an excess
force to the lever.
NOTE:
Make sure of the orientation of DIMM. The terminal side of
the DIMM has cutout to prevent incorrect insertion.
The levers automatically close when the DIMM is inserted into the socket.
10.
Close the levers securely.
11.
Install DIMM in the other DIMM connector similarly to Steps 7 through 10.
12.
Install the memory board removed in Steps 3.
13.
Install the front bezel.
14.
Power on the server and verify that POST displays no error messages.
If POST displays an error message, take a note on the message and see the POST error
messages listed in Chapter 8.
15.
Start the SETUP and select [Advanced]
→
[Memory Configuration] to verify that the
installed DIMM slot shows the status "Normal". (See Chapter 4 or details.)
16.
Select "Yes" for [Reset Configuration Data] on the [Advanced] menu.
This setting is required to change the hardware configuration data. See Chapter 4 for
details.
17.
If Windows Server 2003 is in use, set the paging file size to the recommended value (total
memory size * 1.5) or a greater value. See Chapter 5 for details.