NEC Express5800/140Rf-4, Руководство пользователя

Страница: 189 / 461

Configuring Your Server 4-91
Disk Array
WebBIOS manages Disk Array by a number of 0 origin. You can see a number of Disk Array where
[DG X] in Physical Drives and Virtual Drives.
Universal RAID Utility manages Disk Array by a number of 1 origin. You can see a number of Disk
Array where [Disk Array] in the property of Logical Drive on RAID Viewer or [RAID Controller
#X Disk Array #Y] in the property of Disk Array on raidcmd command.
Physical Drive and Physical Device
WebBIOS manages Physical Drive by three numbers (Connector number:Enclosure number:Slot
number). You can view these numbers shown by [x:x:x] in Physical Drives box. Note, however, the
Connector number is always shown as "()" because it is not supported with this server. The
Enclosure numbers are represented by 1-origin, and the Slot numbers are represented by 0-origin.
Universal RAID Utility manages Physical Device by number of 1-origin and ID, Enclosure number,
Slot number. The numbers of physical devices connected to the controller are sorted in ascending
order based on ID and assigned with 1-origin number starting from the smallest number. The ID is
same value of Connected Port shown in Physical Drives Properties box in WebBIOS. Enclosure
number and Slot number are 1-origin.
IMPORTANT:
Note that the slot numbers shown in Physical Drives
box of WebBIOS are represented by 0-origin numbers, but those in
Universal RAID Utility are 1-origin numbers.
Setting of Priority
WebBIOS displays and sets Rebuild Priority and Patrol Read Priority, Consistency Check Priority of
RAID Controller by percentage. But, Universal RAID Utility uses three levels as High/Middle/Low
for them.
The setting value of WebBIOS and the display level of Universal RAID Utility
Item Setting value of WebBIOS Universal RAID Utility level
Rebuild Priority
Rebuild Rate (WebBIOS) 80 to 100 High
31 to 79 Middle
0 to 30 Low
Patrol Read Priority
Patrol Read Rate (WebBIOS) 80 to 100 High
31 to 79 Middle
0 to 30 Low
Consistency Check Priority
Consistency Check Rate
(WebBIOS) 80 to 100 High
31 to 79 Middle
0 to 30 Low