NEC Express5800/120Rh-2, Руководство пользователя

Страница: 48 / 406

2-16 General Description
STANDARD FEATURES
High performance Expandability
„ Intel

Xeon

Processor
(3.20DGHz / 3.20GHz / 3.40GHz /
3.60GHz / 3.80GHz)
„ High-speed network interface
(1000Mbps/100Mbps/10Mbps supported)
„ High-speed disk access
(Ultra320 SCSI)
„ High-speed memory access (DDR2-400)
„ Three full-length, full-height 64-bit/100
MHz PCI-X riser slots and three low
profile 64-bit/66 MHz riser slots
„ Large memory of up to 16 GB
„ Six hot-swap SCSI hard disk drive bays
„ Up to two multi-processors are available
for upgrade.
„ One backup file bay
„ USB2.0 interface (A USB-support driver
is required.)
„ Two network ports
High-reliability Many Available Features
„ Graphic accelerator "ATI RADEON 7000"
support
„ El Torito Bootable CD-ROM (no
emulation mode) format support
„ POWER switch mask
„ Software power-off
„ Remote power-on feature
„ AC-Link feature
„ Consoleless feature
Self-diagnosis
„ Memory monitoring feature (error
correction/error detection)
„ CPU/memory degradation feature (logical
isolation of a failed device)
„ Memory chipkill feature
„ Bus parity error detection
„ Temperature detection
„ Error notification
„ Internal fan monitoring feature
„ Internal voltage monitoring feature
„ Redundant power supply (hot-swap)
„ Onboard RAID 0/1
„ Auto-rebuild feature (hot-swappable)
„ BIOS password feature
„ Mechanical security lock
„
Remote Management Card
„ Redundant fans (option)
„ Power On Self-Test (POST)
„ Test and Diagnosis (T&D)
Management Utilities Easy and Fine Setup
„ NEC ESMPRO
„ NEC DianaScope
Maintenance Features
„ Off-line Maintenance Utility
„ Memory dump feature using the DUMP
switch
„ NEC EXPRESSBUILDER (system setup
utility)
„ Configuration Parameter Diskette Creator
„ SETUP (BIOS setup utility)
„ SCSI Select (SCSI device utility)