NEC Express5800/120Rh-2, Руководство пользователя

Страница: 259 / 406

Troubleshooting 8-23
The following error log is included in the event log while operating the system:
Event ID: 16
Source: iANSMiniport
Type: Error
Category: None
Description: Team #0:The last adapter has lost link.
Network connection has been lost.
→
Though the above error is included in the event log when specifying the teaming, the
LAN driver can work properly.
[Complete] does not appear on [Role of Computer] screen.
→
The [Complete] does not appear if the Setup File that has already been created is
loaded.
→
[Complete] appears only when you first entered the [Role of Computer] screen.
Once you go to the next screen from [Role of Computer], the [Complete] will not
appear even if you enter [Back] to go back to the [Role of Computer] screen.
Select [Use Existing Array] at [New/Existing RAID Configuration], but the OS is installed in the
whole area of the disk.
→ Is there any other partition than the partition to re-use (excluding maintenance area)?
If the partition other than the one to re-use does not exist, the setup will reserve the
whole area of the disk to install Windows 2000.
Specified to join the Domain, but the system is installed as Workgroup.
→
When the setup fails to join the Domain during the installation, it will install the
system as Workgroup. Open [System] in Control Panel to specify joining the
Domain.
Specified large value as partition size, but when Windows 2000 is actually started, the system
partition is created by 4095MB.
→
Is the [Partition Size] specified by the value larger than the real area? If you want to
create one partition in all area of the hard disk drive (excluding the maintenance area)
to install the OS, specify [All Area].
→
<For Windows 2000>
Are you specifying over 200GB for the partition size?
Be sure to specify less than 200GB for the partition size.