![background image](http://html.mh-extra.com/html/nec/express5800-120rh-2/express5800-120rh-2_user-manual_251213134.webp)
4-38 Configuring Your Server
Creating RAID10 Array
1.
Select [RAID-10] on [Select RAID Type] window and press
Enter
.
2.
Use the cursor key to move the focus to the desired hard disk drive and determine it by
Space
, and then press
Enter.
An [X] mark is placed next to the selected hard disk drive.
3.
Select the desired stripe size and press
Enter
. Available stripe sizes are 16, 32, and 64
KB.
4.
Enter the desired RAID Name in [Assign RAID Name] window.
IMPORTANT:
RAID Name must be unique and up to 15 characters are acceptable.
If a valid partition information or a boot block is detected in the
selected hard disk drive, a warning message will be displayed.
Select [Yes] to continue creating an array, [No] to terminate.
Take sufficient care not to select the proper hard disk drive. If not,
the data will not be restored.
Содержание Express5800/120Rh-2
