RMX-4000 Series Programming Manual
69
Syntax
:CURRent:DYNamic:HIGH:L1/L2 <NRf+>[A]
Parameter
NRf+[A]
L1 10
Sets L1 to 10 A (high range
only)
L2 20
Sets L2 to 20 A (high range
only)
L1/L2 MIN
Sets L1 or L2 to the
minimum level for the
specific channel
L1/L2 MAX
Sets L1 or L2 to the
maximum level for the
specific channel
Example
:CURR:DYN:HIGH:L1 10
In high range CC
dynamic mode, sets L1
(level 1) to 10 A.
Query Syntax
:CURRent:DYNamic:HIGH:L1/L2? [MIN|MAX]
Return Parameter <NR2> [MAX|MIN]
Return value
1 unit= 1 A
Returns the current of
Level 1/ 2 (L1/L2)
MAX/MIN
Returns the allowable
maximum and minimum
Query Example
:CURR:DYN:HIGH:L2?
MAX
20.4000
Returns the maximum
current allowed for the
channel. (RMX-4003)
63B
:CURRent:DYNamic:HIGH:RISE/FALL
Channel-Specific
Command
Description
Sets the high range rising/falling slew rate for CC
dynamic mode for the specific channel.
Syntax
:CURRent:DYNamic:HIGH:RISE/FALL <NRf+>[A/µs]
Parameter
<NRf+>[A/µs]
Slew rate
Содержание RMX-400 Series
