manualshive.com logo in svg

Nace CP 1, Руководство по эксплуатации

Курсовое пособие "Nace CP 1" представляет собой подробное руководство с инструкциями по использованию. Вы можете бесплатно скачать это пособие на нашем сайте. Этот учебник поможет вам освоить необходимые навыки и знания. Скачайте его сейчас на manualshive.com.

Поделиться
Скачать
background image

RP0176-2003 

 

 
NACE International 

3 

Structure-to-Electrolyte Potential: The potential difference 
between the surface of a buried or submerged metallic 
structure and the electrolyte that is measured with reference 
to an electrode in contact with the electrolyte.  
 
Submerged Zone:  The zone that extends downward from 
the splash zone and includes that portion of the structure 
below the mudline.  
 
Subsea Template:  A structure intended to be placed on 
the sea floor to accommodate oil and/or gas wells, related 
production equipment, and/or pipelines. 
 
Thinner:  A volatile solvent used to lower the viscosity of a 
coating material. 
 
Thermoplastic:  A material capable of being repeatedly 
softened by heat and hardened by cooling.  
 
Thermosetting: A material that undergoes a chemical reac-
tion from the action of heat and pressure, catalysts, and 
ultraviolet light, leading to a relatively infusible state.  
 
Tie Coat: A special-purpose intermediate coat, usually org-
anic, used to act as a bridge between a primer and finish 
coat to overcome either incompatibility or application 
problems between the primer and finish coats. 

Urethane: A chemically cured coating consisting of a solu-
tion vinyl, vinyl acrylic, or acrylic base reacted with isocyan-
ate converter to form a tough, durable, glossy coating.  
 
Valve Reach Rod: A long valve stem extension that en-
ables personnel on the surface to open and close a ballast 
control valve located near the bottom of the structure.  
 
Vinyl Acrylic: Vinyl resin modified with acrylic resin in sol-
vent solution.  
 
Vinyl Coatings: Vinyl resin dissolved in a solvent. Vinyl sol-
ution coatings may be air dried or baked.  
 
Voltage: An electromotive force, or a difference in electrode 
potentials, expressed in volts or millivolts.  
 
Voltage Drop: The voltage across a current-carrying resist-
ance in accordance with Ohm’s Law.  
 
Wash Primer: A thin, inhibiting primer, usually chromate 
pigmented, with a polyvinyl butyral binder.  
 
Wear Plate: A sacrificial member attached to the structure 
in the splash zone to protect it from anticipated corrosion 
and/or erosion caused by ice and/or high-velocity, silt-laden 
water.  

 

 ________________________________________________________________________  

 

Section 3: Structural Design for Corrosion Control 

 

3.1 Introduction 
 

3.1.1  This section recommends design features that 
simplify corrosion control of structural steel in the at-
mospheric, splash, and submerged zones of offshore 
structures.  The structural design parameters that must 
be considered for an offshore structure to resist dy-
namic and static loads are the responsibility of civil and 
structural engineers and are not a part of this standard.  
 

3.2  Splash Zone  
 

3.2.1  This is the zone of an offshore structure that is 
alternately in and out of the water because of the influ-
ence of tides, winds, and seas.  Excluded from this 
zone are surfaces that are wetted only during major 
storms.  In the Gulf of Mexico, the splash zone typically 
covers an interval of about 2 m (6 ft); in Cook Inlet, 
Alaska, the interval approaches 9 m (30 ft); during win-
ter storms the splash zone in the North Sea can be 10 
m (33 ft).  
 
3.2.2  A structure should be designed to minimize the 
surface area of steel in the splash zone. Intersecting 
“T,” “K,” and “Y” joints should be avoided in the splash 
zone.  

3.2.3  Methods for controlling corrosion in the splash 
zone are presented in Section 10.  
 
3.2.4  Added metal thickness, either as a weld-applied 
wrap or as a heavier-wall tubular member, may be 
used to compensate for anticipated splash zone corro-
sion over the life of an offshore structure. 
 
In determining the required level of added wall thick-
ness the following factors should be taken into account: 
 

•

 

Required life of the structure 

•

 

Use of lifetime minimum or no maintenance coat-
ings (e.g., thermal-sprayed aluminum) 

•

 

Maintenance philosophy if there is coating dam-
age (how long is it likely to be left to corrode before 
the coating is repaired) 

•

 

Corrosion rate of carbon steel in seawater at the 
location the structure will be installed 

 
3.2.5  Piping, etc., passing through the splash zone, 
that is to be removed after installation, should prefer-
ably be clamped to the structural member, not welded 
to it. 
 

Содержание CP 1
























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CP 1

Omnia 11 Quick Start Installation Manual preview
11
Бренд: Omnia Страницы: 8
3M 1450 Product Information Sheet preview
1450
Бренд: 3M Страницы: 2
idiag P100 Quick Reference Manual preview
P100
Бренд: idiag Страницы: 12
Rainbow Quantum Instruction Manual preview
Quantum
Бренд: Rainbow Страницы: 18
Eaton PowerXL DX-NET-ETHERNET2-2 User Manual preview
PowerXL DX-NET-ETHERNET2-2
Бренд: Eaton Страницы: 48
Eaton Power Xpert C445 Manual preview
Power Xpert C445
Бренд: Eaton Страницы: 2
Eaton SPD Series Instruction Booklet preview
SPD Series
Бренд: Eaton Страницы: 16
Eaton 2596 Installation, Operation & Maintenance Manual preview
2596
Бренд: Eaton Страницы: 15
Mangar International Leglifter User Instructions And Warranty preview
Leglifter
Бренд: Mangar International Страницы: 8
Malvern Instruments Zetasizer uV Manual preview
Zetasizer uV
Бренд: Malvern Instruments Страницы: 30
zarges Z200 Assembly And Usage Instructions preview
Z200
Бренд: zarges Страницы: 36
OHAUS Guardian 2000 Instruction Manual preview
Guardian 2000
Бренд: OHAUS Страницы: 84
SandenVendo HFD000006 Technical & Service Manual preview
HFD000006
Бренд: SandenVendo Страницы: 19
Orliman STOMAMED COL-160 Manual preview
STOMAMED COL-160
Бренд: Orliman Страницы: 12
American DJ Ruby Royal User Instructions preview
Ruby Royal
Бренд: American DJ Страницы: 12
aion ACHILLES Instructions Manual preview
ACHILLES
Бренд: aion Страницы: 10
COOPS & FEATHERS 250-71 Assembly Instructions preview
250-71
Бренд: COOPS & FEATHERS Страницы: 4
Easy Camp 680127/186 Instruction Manual preview
680127/186
Бренд: Easy Camp Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды