manualshive.com logo in svg

Nace CP 1, Руководство по эксплуатации

Курсовое пособие "Nace CP 1" представляет собой подробное руководство с инструкциями по использованию. Вы можете бесплатно скачать это пособие на нашем сайте. Этот учебник поможет вам освоить необходимые навыки и знания. Скачайте его сейчас на manualshive.com.

Поделиться
Скачать
background image

NACE GLOSSARY OF CORROSION-RELATED TERMS 

 

 

©

 2002, NACE International.  This publication may not be reprinted without the written consent of NACE International. 

 

Page 8 of 18 

EPOXY 

Type of resin formed by the 
reaction of aliphatic or aromatic 
polyols (like bisphenol) with 
epichlorohydrin and 
characterized by the presence of 
reactive oxirane end groups.  
 

EQUILIBRIUM 
POTENTIAL 

The potential of an electrode in 
an electrolyte at which the 
forward rate of a given reaction is 
exactly equal to the reverse rate; 
the electrode potential with 
reference to a standard 
equilibrium, as defined by the 
Nernst equation. 
 

EROSION 

The progressive loss of material 
from a solid surface due to 
mechanical interaction between 
that surface and a fluid, a 
multicomponent fluid, or solid 
particles carried with the fluid.  
 

EROSION-CORROSION 

A conjoint action involving 
corrosion and erosion in the 
presence of a moving corrosive 
fluid or a material moving through 
the fluid, leading to accelerated 
loss of material. 
 

EXCHANGE CURRENT 

The rate at which either positive 
or negative charges are entering 
or leaving the surface when an 
electrode reaches dynamic 
equilibrium in an electrolyte. 
 

EXFOLIATION 
CORROSION 

Localized subsurface corrosion in 
zones parallel to the surface that 
result in thin layers of uncorroded 
metal resembling the pages of a 
book. 
 

EXTERNAL CIRCUIT 

The wires, connectors, 
measuring devices, current 
sources, etc., that are used to 
bring about or measure the 
desired electrical conditions 
within an electrochemical cell.  It 
is this portion of the cell through 
which electrons travel. 
 

F  

 

FATIGUE 

The phenomenon leading to 
fracture of a material under 
repeated or fluctuating stresses 
having a maximum value less 
than the tensile strength of the 
material. 
 

FATIGUE STRENGTH 

The maximum stress that can be 
sustained for a specified number 
of cycles without failure.  
 

FAULT CURRENT 

A current that flows from one 
conductor to ground or to another 
conductor due to an abnormal 
connection (including an arc) 
between the two.  A fault current 
flowing to ground may be called 
a ground fault current. 

 
FERRITE 

The body-centered cubic 
crystalline phase of iron-based 
alloys. 
 

FERRITIC STEEL 

A steel whose microstructure at 
room temperature consists 
predominantly of ferrite. 
 

FILIFORM CORROSION 

Corrosion that occurs under a 
coating in the form of randomly 
distributed thread-like filaments. 

FILM 

A thin, not necessarily visible 
layer of material.  
 

FINISH COAT 

[See 

Topcoat

.] 

 

FORCED DRAINAGE 

Drainage applied to underground 
or submerged metallic structures 
by means of an applied 
electromotive force or sacrificial 
anode. 

 
FOREIGN STRUCTURE  

Any metallic structure that is not 
intended as a part of a system 
under cathodic protection. 
 

FOULING 

An accumulation of deposits.  
This includes accumulation and 
growth of marine organisms on a 
submerged metal surface and 
the accumulation of deposits 
(usually inorganic) on heat 
exchanger tubing. 

 
FRACTOGRAPHY 

Descriptive treatment of fracture, 
especially in metals, with specific 
reference to photographs of the 
fracture surface. 
 

FRACTURE MECHANICS 

A quantitative analysis for 
evaluating structural reliability in 
terms of applied stress, crack 
length, and specimen geometry. 

 
FREE MACHINING 

The machining characteristics of 
an alloy to which an ingredient 
has been introduced to give 
small broken chips, lower power 
consumption, better surface 
finish, and longer tool life. 
 

FRETTING CORROSION 

Deterioration at the interface of 

Содержание CP 1
























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CP 1

ACE INSTRUMENTS WAVE Operating Manual preview
WAVE
Бренд: ACE INSTRUMENTS Страницы: 15
Wave Fitness Neptune Owner'S Manual preview
Neptune
Бренд: Wave Fitness Страницы: 15
Bang & Olufsen BeoPlay A9 Quick Manual preview
BeoPlay A9
Бренд: Bang & Olufsen Страницы: 2
CAE Healthcare Ares User Manual preview
Ares
Бренд: CAE Healthcare Страницы: 108
Cannon CT-1000 Manual preview
CT-1000
Бренд: Cannon Страницы: 36
Fayat BOMAG BW 100 ADM-5 Operating Instruction preview
BOMAG BW 100 ADM-5
Бренд: Fayat Страницы: 216
B medical systems MT100 Instructions For Use Manual preview
MT100
Бренд: B medical systems Страницы: 28
Rainin Instrument P-10 Manual preview
P-10
Бренд: Rainin Instrument Страницы: 16
Wacker Neuson BS Operator'S Manual preview
BS
Бренд: Wacker Neuson Страницы: 34
Össur REBOUND DUAL ST Instructions For Use Manual preview
REBOUND DUAL ST
Бренд: Össur Страницы: 104
Össur OFM1 Instructions For Use Manual preview
OFM1
Бренд: Össur Страницы: 130
Tarmo 602456 Manual preview
602456
Бренд: Tarmo Страницы: 4
Osram ENCELIUM User Manual preview
ENCELIUM
Бренд: Osram Страницы: 4
Keithley 1973 Instruction Manual preview
1973
Бренд: Keithley Страницы: 57
ABB TPL85-B12 Operation Manual preview
TPL85-B12
Бренд: ABB Страницы: 154
Icom DS-100 (#02) Instruction Manual preview
DS-100 (#02)
Бренд: Icom Страницы: 36
Bühler technologies Smart-Sample-Tube Brief Instructions preview
Smart-Sample-Tube
Бренд: Bühler technologies Страницы: 24
Bestway 58390 Owner'S Manual preview
58390
Бренд: Bestway Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды