manualshive.com logo in svg

Nace CP 1, Руководство по эксплуатации

Курсовое пособие "Nace CP 1" представляет собой подробное руководство с инструкциями по использованию. Вы можете бесплатно скачать это пособие на нашем сайте. Этот учебник поможет вам освоить необходимые навыки и знания. Скачайте его сейчас на manualshive.com.

Поделиться
Скачать
background image

RP0196-2004 

 

 

NACE International 

 

  1 

 ________________________________________________________________________  
 

Section 1:  General 

 
1.1  This standard presents recommended procedures for 
using galvanic anodes to apply CP to the internal 
submerged surfaces of steel tanks used for the storage of 
potable and nonpotable fresh waters. 
 
1.2 It is recognized that impressed current systems are 
used extensively for CP of the internal surfaces of water 
storage tanks; however, this standard addresses only 
galvanic anode systems.  For a description of impressed 
CP current systems, refer to NACE Standard RP0388.

1

 

 
1.3  Natural waters, as used in this standard, include both 
potable and nonpotable fresh water—including reclaimed 
water—associated with water supply, irrigation, and fire 
protection systems. 
 
1.4 The ground level and elevated storage tanks 
considered in this standard are of welded, bolted, or riveted-
steel construction, and include many shapes and sizes. 
 
1.5  CP as described in this standard may be used alone to 
control corrosion of submerged steel surfaces or may be 
used as a complement to the protection provided by 
protective coatings or other procedures.

2

  CP cannot protect 

surfaces that are not submerged; these surfaces must be 
protected by coatings alone. 
 
1.6  CP may be installed to control corrosion in both newly 
constructed and existing tanks.  When CP is used on  

existing tanks, it may be necessary to drain the tank during 
installation. 
 
1.7  It is recognized that the tanks under consideration are 
often associated with potable water and fire protection 
systems that may be subject to public health and safety 
regulations.

3

  This standard shall not infringe on those 

regulations.  Proper disinfection of the tanks may be 
required after installation. 
 
1.8 The provisions of this standard should be applied 
under the direction of a competent corrosion engineer.  The 
term “corrosion engineer,” as used in this standard, refers to 
a person who, by reason of knowledge of the physical 
sciences and the principles of engineering and mathematics 
as acquired by professional education and related practical 
experience, is qualified to practice corrosion control, 
including CP, for water storage tanks.  Such persons may 
be Registered Professional Engineers or persons 
recognized as being qualified or certified as Corrosion 
Specialists or CP Specialists by NACE if their professional 
activities include suitable experience in corrosion control 
and CP. 
 
1.9  This standard may not be applicable in all situations. 
The corrosion engineer may consider alternative corrosion 
control methods. 

 

 ________________________________________________________________________  
 

Section 2:  Definitions

 
Anode:  The electrode of an electrochemical cell at which 
oxidation occurs.  Electrons flow away from the anode in the 
external circuit.  Corrosion usually occurs and metal ions 
enter the solution at the anode.  

 

Anode Circuit:  The path from a single anode or multiple 
anodes connected through a shunt, a resistor, and the 
connection to the tank. 
 
Calcareous Coating:  A layer consisting of calcium 
carbonate and other salts deposited on the surface.  When 
the surface is cathodically polarized as in CP, this layer is 
the result of the increased pH adjacent to the protected 
surface. 
 
Cathode:  The electrode of an electrochemical cell at which 
reduction is the principal reaction.  Electrons flow toward the 
cathode in the external circuit. 
 
Cathodic Protection (CP):  A technique to reduce the 
corrosion of a metal surface by making that surface the 
cathode of an electrochemical cell. 

Cathodic Protection (CP) Coupon:  A metal specimen 
made of similar material as the structure under 
investigation, which is connected to the external surface of, 
and immersed in, the electrolyte adjacent to the structure 
being protected by CP. 
 
Coating:  A liquid, liquefiable, or mastic composition that, 
after application to a surface, is converted into a solid 
protective, decorative, or functional adherent film. 
 
Conductivity:  (1) A measure of the ability of a material to 
conduct an electric charge.  It is the reciprocal of resistivity.  
(2) The current transferred across a material (e.g., coating) 
per unit potential gradient. 
 
Corrosion:  The deterioration of a material, usually a metal, 
that results from a reaction with its environment. 
 
Current Density:  The current to or from a unit area of an 
electrode surface. 
 

Содержание CP 1
























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CP 1

ABB S4Cplus Instruction preview
S4Cplus
Бренд: ABB Страницы: 86
Panasonic AJSPD850P - P2 DECK Operating Instructions Manual preview
AJSPD850P - P2 DECK
Бренд: Panasonic Страницы: 73
Raymarine RS232 Owner'S Handbook Manual preview
RS232
Бренд: Raymarine Страницы: 24
Hansen P4 Installation Manual preview
P4
Бренд: Hansen Страницы: 72
Quadro mdb Evolution Construction Manual preview
Evolution
Бренд: Quadro mdb Страницы: 4
AAT SOLO Original User Manual preview
SOLO
Бренд: AAT Страницы: 16
AAT S-max Translation Of The Original User Manual preview
S-max
Бренд: AAT Страницы: 40
Dairy Tech Platinum Series Operator'S Manual preview
Platinum Series
Бренд: Dairy Tech Страницы: 38
H&S M6 Parts List And Operator'S Instructions preview
M6
Бренд: H&S Страницы: 34
QAL Medical 480 Service And Technical Manual preview
480
Бренд: QAL Medical Страницы: 42
ACCO Brands LOUDEN 200 Series Installation, Operation, Maintenance And Parts Manual preview
LOUDEN 200 Series
Бренд: ACCO Brands Страницы: 144
B&K 4416 Service Manual preview
4416
Бренд: B&K Страницы: 16
B&G H5000 Pilot Quick Reference Manual preview
H5000 Pilot
Бренд: B&G Страницы: 2
Gearmore T230 Operation, Service And Parts Manual preview
T230
Бренд: Gearmore Страницы: 47
Xtool A30 Pro Manual preview
A30 Pro
Бренд: Xtool Страницы: 51
H-TEC Education D201 Operating Instructions Manual preview
D201
Бренд: H-TEC Education Страницы: 16
H-TEC Education A129 Operating Instructions Manual preview
A129
Бренд: H-TEC Education Страницы: 12
Tanco 1300 Series Operator'S Handbook Manual preview
1300 Series
Бренд: Tanco Страницы: 112

Бренды по названию

Популярные бренды

Загрузить еще бренды