Sleep Mode1: Start 99
4
Menu6: Sleep Mode
Sleep Mode1: Start
Activate Sleep Mode.
Make sure to follow the instructions on the operation panel to perform daily
maintenance.
Sleep Mode2: Cleaning Timer
Sets the timer to perform head cleaning in the sleep mode.
Setting values
<Off> / 1 h / 2 h / 3 h / 4 h / 5 h / 6 h / 9 h /
12 h / 18 h / 24 h
<> indicates the default setting.
If you set an interval, the display will shift
to “SleepMode 1: Start”.
Important!
In following cases, the printer does not perform head cleaning by the timer in sleep mode.
• Front cover is open.
• Maintenance cover is open.
• The waste fluid tank is full.
• There is little remaining ink in the ink cartridge (or no ink).
• The ink cartridge has been removed.
• The inserted ink cartridge is not the genuine ink cartridge, etc.
If one of the above conditions occurs during Head cleaning, cleaning is stopped.
When the printer returns to a normal state, Head cleaning is restarted.
Menu6: Sleep Mode
Sleep Mode1
Start
Sleep Mode2
Cleaning Timer
Cleaning Timer:
(1-24)
24h
Содержание XPJ-661UF
