MUTOH XPJ-661UF Скачать руководство пользователя

Страница: 137 / 174

Replacing absorption material for the flushing box 137

[6]

Hold the handle on the front cover to gently open it.

• Fully open the maintenance cover.

Always fully open the maintenance cover.

If you leave it half-open, the maintenance cover can suddenly close.

[7]

Remove the absorption material for the flushing box.

• Pull the tab up of the absorption material for the flushing box, and release

the hook.

Important!

When removing the absorption material for the flushing box, be

cautious of ink drops.

[8]

Attach new absorption material for the flushing box.

Note

Used absorption material for the flushing box should be put in a plastic bag, etc, and

dispose of it in compliance with local ordinance and instructions of local authorities.

[9]

Hold the position shown on the left and gently close the cover.

When closing the maintenance cover, hold the tab on the maintenance cover to gently close it.

Do not place your fingers on the edges of the printer’s opening portion, or on any parts around those edges. Your fingers could
get caught and be injured.

CAUTION

Содержание XPJ-661UF















































































































































































Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды

MUTOH XPJ-661UF, Руководство по эксплуатации

Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды