MUTOH XPJ-661UF, Руководство по эксплуатации

Страница: 32 / 174

32 Printing area
1 Printing
• When loading new media, you need to enter the media size (width and length) and origin position (print start position)
from the operation panel.
• The guide groove on the table shows the maximum printable area (483 mm x 594 mm).
• Use the screw hole (M4) to attach your own jig.
• Printing is always started from Origin position (print start point).
See the figure below as example.
• See
" Table Dimensions & Diagrams " P. 20
for detailed dimension.
Printing area
Important!
When using this printer, DO NOT place any objects around obstacle detection area.
Otherwise, it will cause false detection of the obstacle sensor and the printer may not be able to print correctly.
Printing
ABC
DEF
GHI
JKL
CR-direction
PF-
dir
ec
tion
Origin position(PF, CR)
Screw holes for
jig installation
(M4)
(Printer Front side)
Guide groove
Media
Table
Media height
Media width
Media length
Obstacle sensor
Obstacle detection area